-- Previous version took a Collection<GATKSAMRecord> to remove, and called ArrayList.removeAll() on this collection to remove reads from the ActiveRegion. This can be very slow when there are lots of reads, as ArrayList.removeAll ultimately calls indexOf() that searches through the list calling equals() on each element. New version takes a set, and uses an iterator on the list to remove() from the iterator any read that is in the set. Given that we were already iterating over the list of reads to update the read span, this algorithm is actually simpler and faster than the previous one.
-- Update HaplotypeCaller filterReadsInRegion to use a Set not a List.
-- Expanded the unit tests a bit for ActiveRegion.removeAll
-- Trims down active regions and associated reads and haplotypes to a smaller interval based on the events actually in the haplotypes within the original active region (without extension). Radically speeds up calculations when using large active region extensions. The ActiveRegion.trim algorithm does the best job it can of trimming an active region down to a requested interval while ensuring the resulting active region has a region (and extension) no bigger than the original while spanning as much of the requested extend as possible. The trimming results in an active region that is a subset of the previous active region based on the position and types of variants found among the haplotypes
-- Retire error corrector, archive old code and repurpose subsystem into a general kmer counter. The previous error corrector was just broken (conceptually) and was disabled by default in the engine. Now turning on error correction throws a UserException. Old part of the error corrector that counts kmers was extracted and put into KMerCounter.java
-- Add final simplify graph call after we prune away the non-reference paths in DeBruijnAssembler
Currently, the multi-allelic test is covering the following case:
Eval A T,C
Comp A C
reciprocate this so that the reverse can be covered.
Eval A C
Comp A T,C
And furthermore, modify ConcordanceMetrics to more properly handle the situation where multiple alternate alleles are available in the comp. It was possible for an eval C/C sample to match a comp T/T sample, so long as the C allele were also present in at least one other comp sample.
This comes from the fact that "truth" reference alleles can be paired with *any* allele also present in the truth VCF, while truth het/hom var sites are restricted to having to match only the alleles present in the genotype. The reason that truth ref alleles are special case is as follows, imagine:
Eval: A G,T 0/0 2/0 2/2 1/1
Comp: A C,T 0/0 1/0 0/0 0/0
Even though the alt allele of the comp is a C, the assessment of genotypes should be as follows:
Sample1: ref called ref
Sample2: alleles don't match (the alt allele of the comp was not assessed in eval)
Sample3: ref called hom-var
Sample4: alleles don't match (the alt allele of the eval was not assessed in comp)
Before this change, Sample2 was evaluated as "het called het" (as the T allele in eval happens to also be in the comp record, just not in the comp sample). Thus: apply current
logic to comp hom-refs, and the more restrictive logic ("you have to match an allele in the comp genotype") when the comp is not reference.
Also in this commit,major refactoring and testing for MathUtils. A large number of methods were not used at all in the codebase, these methods were removed:
- dotProduct(several types). logDotProduct is used extensively, but not the real-space version.
- vectorSum
- array shuffle, random subset
- countOccurances (general forms, the char form is used in the codebase)
- getNMaxElements
- array permutation
- sorted array permutation
- compare floats
- sum() (for integer arrays and lists).
Final keyword was extensively added to MathUtils.
The ratio() and percentage() methods were revised to error out with non-positive denominators, except in the case of 0/0 (which returns 0.0 (ratio), or 0.0% (percentage)). Random sampling code was updated to make use of the cleaner implementations of generating permutations in MathUtils (allowing the array permutation code to be retired).
The PaperGenotyper still made use of one of these array methods, since it was the only walker it was migrated into the genotyper itself.
In addition, more extensive tests were added for
- logBinomialCoefficient (Newton's identity should always hold)
- logFactorial
- log10sumlog10 and its approximation
All unit tests pass
-- Instead of doing a full SW alignment against the reference we read off bubbles from the assembly graph.
-- Smith-Waterman is run only on the base composition of the bubbles which drastically reduces runtime.
-- Refactoring graph functions into a new DeBruijnAssemblyGraph class.
-- Bug fix in path.getBases().
-- Adding validation code to the assembly engine.
-- Renaming SimpleDeBruijnAssembler to match the naming of the new Assembly graph class.
-- Adding bug fixes, docs and unit tests for DeBruijnAssemblyGraph and KBestPaths classes.
-- Added ability to ignore bubbles that are too divergent from the reference
-- Max kmer can't be bigger than the extension size.
-- Reverse the order that we create the assembly graphs so that the bigger kmers are used first.
-- New algorithm for determining unassembled insertions based on the bubble traversal instead of the full SW alignment.
-- Don't need the full read span reference loc for anything any more now that we clip down to the extended loc for both assembly and likelihood evaluation.
-- Updating HaplotypeCaller and BiasedDownsampling integration tests.
-- Rebased everything into one commit as requested by Eric
-- improvements to the bubble traversal are coming as a separate push
-- Active regions are created as normal, but they are split and trimmed to the engine intervals when added to the traversal, if there are intervals present.
-- UnitTests for ActiveRegion.splitAndTrimToIntervals
-- GenomeLocSortedSet.getOverlapping uses binary search to efficiently in ~ log N time find overlapping intervals
-- UnitTesting overlap function in GenomeLocSortedSet
-- Discovered fundamental implementation bug in that adding genome locs out of order (elements on 20 then on 19) produces an invalid GenomeLocSortedSet. Created a JIRA to address this: https://jira.broadinstitute.org/browse/GSA-775
-- Constructor that takes a collection of genome locs now sorts its input and merges overlapping intervals
-- Added docs for the constructors in GLSS
-- Update HaplotypeCaller MD5s, which change because ActiveRegions are now restricted to the engine intervals, which changes slightly the regions in the tests and so the reads in the regions, and thus the md5s
-- GenomeAnalysisEngineUnitTest needs to provide non-null genome loc parser
The migration of org.broadinstitute.variant into the Picard repo is
complete. This commit deletes the org.broadinstitute.variant sources
from our repo and replaces it with a jar built from a checkout of the
latest Picard-public svn revision.
-- All functions tested. In the testing / review I discovered several bugs in the ActiveRegion routines that manipulate reads. New version should be correct
-- Enforce correct ordering of supporting states in constructor
-- Enforce read ordering when adding reads to an active region in add
-- Fix bug in HaplotypeCaller map with new updating read spans. Now get the full span before clipping down reads in map, so that variants are correctly placed w.r.t. the full reference sequence
-- Encapsulate isActive field with an accessor function
-- Make sure that all state lists are unmodifiable, and that the docs are clear about this
-- ActiveRegion equalsExceptReads is for testing only, so make it package protected
-- ActiveRegion.hardClipToRegion must resort reads as they can become out of order
-- Previous version of HC clipped reads but, due to clipping, these reads could no longer overlap the active region. The old version of HC kept these reads, while the enforced contracts on the ActiveRegion detected this was a problem and those reads are removed. Has a minor impact on PLs and RankSumTest values
-- Updating HaplotypeCaller MD5s to reflect changes to ActiveRegions read inclusion policy
-Moved some of the more specialized / complex VariantContext and VCF utility
methods back to the GATK.
-Due to this re-shuffling, was able to return things like the Pair class back
to the GATK as well.
-- Helped ID more bugs in the ActivityProfile, necessitating a new algorithm for popping off active regions. This new algorithm requires that at least maxRegionSize + prob. propagation distance states have been examined. This ensures that the incremental results are the same as you get reading in an entire profile and running getRegions on the full profile
-- TODO is to remove incremental search start algorithm, as this is no longer necessary, and nicely eliminates a state variable I was always uncomfortable with
-- GATKSAMRecords now cache the result of the getAdapterBoundary, allowing us to avoid repeating a lot of work in LIBS
-- Added unittests to cover adapter clipping
-- This new algorithm is essential to properly handle activity profiles that have many large active regions generated from lots of dense variant events. The new algorithm passes unit tests and passes visualize visual inspection of both running on 1000G and NA12878
-- Misc. commenting of the code
-- Updated ActiveRegionExtension to include a min active region size
-- Renamed ActiveRegionExtension to ActiveRegionTraversalParameters, as it carries more than just the traversal extension now
-- Previously we allowed band pass filter size to be specified along with the sigma. But now that sigma is controllable from walkers and from the command line, we instead compute the filter size given the kernel from the sigma, including all kernel points with p > 1e-5 in the kernel. This means that if you use a smaller kernel you get a small band size and therefore faster ART
-- Update, as discussed with Ryan, the sigma and band size to 17 bp for HC (default ART wide) and max band size of 50 bp
-- Based on the new incremental activity profile
-- Unit Tested! Fixed a few bugs with the old band pass filter
-- Expand IncrementalActivityProfileUnitTest to test the band pass filter as well for basic properties
-- Add new UnitTest for BandPassIncrementalActivityProfile
-- Added normalizeFromRealSpace to MathUtils
-- Cleanup unused code in new activity profiles
-- Required before I jump in an redo the entire activity profile so it's can be run imcrementally
-- This restructuring makes the differences between the two functionalities clearer, as almost all of the functionality is in the base class. The only functionality provided by the BandPassActivityProfile is isolated to a finalizeProfile function overloaded from the base class.
-- Renamed ActivityProfileResult to ActivityProfileState, as this is a clearer indication of its actual functionality. Almost all of the misc. walker changes are due to this name update
-- Code cleanup and docs for TraverseActiveRegions
-- Expanded unit tests for ActivityProfile and ActivityProfileState
-- The logic for determining active regions was a bit broken in the HC when intervals were used in the system
-- TraverseActiveRegions now uses the AllLocus view, since we always want to see all reference sites, not just those covered. Simplifies logic of TAR
-- Non-overlapping intervals are always treated as separate objects for determing active / inactive state. This means that each exon will stand on its own when deciding if it should be active or inactive
-- Misc. cleanup, docs of some TAR infrastructure to make it safer and easier to debug in the future.
-- Committing the SingleExomeCalling script that I used to find this problem, and will continue to use in evaluating calling of a single exome with the HC
-- Make sure to get all of the reads into the set of potentially active reads, even for genomic locations that themselves don't overlap the engine intervals but may have reads that overlap the regions
-- Remove excessively expensive calls to check bases are upper cased in ReferenceContext
-- Update md5s after a lot of manual review and discussion with Ryan
* restructured the hash tables into one class (RecalibrationReport) that has all the functionality for the different tables and key managers
* optmized empirical qual calculation when merging recalibration reports
* centralized the quality score quantization functionalities
* unified the creating/loading of all the key manager/hash table structures.
* added unit tests for the gatherer (disabled because gatk report needs to be sorted for automated testing)
* added integration tests for BQSR and on-the-fly recalibration
-- TODO for ryan -- there are bugs in ActivityProfile code that I cannot fix right now :-(
-- UnitTesting framework for ActivityProfile -- needs to be expanded
-- Minor helper functions for ActiveRegion to help with unit tests
Ryan Poplin
Mark DePristo
Chris Hartl
David Roazen
Mauricio Carneiro