-This was accidentally clobbered in a recent commit.
-If you want to compile Java-only, easiest thing to
do is run "ant gatk" rather than modifying build.xml
1) Add in checks for input parameters in MathUtils method. I was careful to use the bottom-level methods whenever possible, so that parameters don't needlessly go through multiple checks (so for instance, the parameters n and k for a binomial aren't checked on log10binomial, but rather in the log10binomialcoefficient subroutine).
This addresses JIRA GSA-767
Unit tests pass (we'll let bamboo deal with the integrations)
2) Address reviewer comments (change UserExceptions to IllegalArgumentExceptions).
3) .isWellFormedDouble() tests for infinity and not strictly positive infinity. Allow negative-infinity values for log10sumlog10 (as these just correspond to p=0).
After these commits, unit and integration tests now pass, and GSA-767 is done.
rebase and fix conflict:
public/java/src/org/broadinstitute/sting/utils/MathUtils.java
-Diff engine output is now included in the actual exception message thrown as a
result of an MD5 mismatch, which allows it to be conveniently viewed on the
main page of a build in Bamboo.
Minor Additional Improvements:
-WalkerTestSpec now auto-detects test class name via new JVMUtils.getCallingClass()
method, and the test class name is now included as a regular part of integration
test output for each test.
-Fix race condition in MD5DB.ensureMd5DbDirectory()
-integrationtests dir is now cleaned by "ant clean"
GSA-915 #resolve
-Even though we're no longer compiling/using contracts in tests,
we still need the cofoja jar in the classpath when testing the
release jars due to some bad behavior on the part of TestNG in
not being able to handle missing annotation classes.
-We don't need to package the cofoja classes in the actual GATK
jar, however (and we never have).
-Make MaxRuntimeIntegrationTest more lenient by assuming that startup overhead
might be as long as 120 seconds on a very slow node, rather than the original
assumption of 20 seconds
-In TraverseActiveRegionsUnitTest, write temp bam file to the temp directory, not
to the current working directory
-SimpleTimerUnitTest: This test was internally inconsistent. It asserted that
a particular operation should take no more than 10 milliseconds, and then asserted
again that this same operation should take no more than 100 microseconds (= 0.1 millisecond).
On a slow node it could take slightly longer than 100 microseconds, however.
Changed the test to assert that the operation should require no more than 10000 microseconds
(= 10 milliseconds)
-change global default test timeout from 20 to 40 minutes (things just take longer
on the farm!)
-build.xml: allow runtestonly target to work with scala test classes
-script to dispatch one farm job per test class and monitor jobs until completion
-new ant target to run tests without doing ANY compilation or extra steps at all
allows multiple instances of the test suite to share the same working directory
-- changed SkipException constructors that are now private in TestNG
-- Updated build.xml to use the latest testng
-- Added guice dependency to ivy
-- Fixed broken SampleDBUnitTest
The SampleDBUnitTest was only passing before because the map comparison in the old TestNG was broken. It was comparing two DIFFERENT samples and testing for "equals"
GSA-695 #resolve
Resources must be in a subdirectory called "resources" in the package
hierarchy to be picked up by the packaging system. Adding each resource
manually to the jars in build.xml does not cause the resource to be
added to the standalone GATK jar when we package the GATK, so it's best
to always use this convention.
-- Has the overall effect that the GATK user AWS keys are no longer visible in the gatk source as plain text. This will stop AWS from emailing me (they crawl the web looking for keys)
-- Added utility EncryptAWSKeys that takes as command line arguments the GATK user AWS access and secret keys, encrypts them with the GATK private key, and writes out the resulting file to resources in phonehome.
-- GATKRunReport now decrypts as needed these keys using the GATK public key as resources in the GATK bundle
-- Refactored the essential function of Resource (reading the resource) from IOUtils into the class itself. Now how to get the data in the resouce is straightforward
-- Refactored md5 calculation code from a byte[] into Utils. Added unit tests
-- Committing the encrypted AWS keys
-- #resolves https://jira.broadinstitute.org/browse/GSA-730
This is an intermediate commit so that there is a record of these changes in our
commit history. Next step is to isolate the test classes as well, and then move
the entire package to the Picard repository and replace it with a jar in our repo.
-Removed all dependencies on org.broadinstitute.sting (still need to do the test classes,
though)
-Had to split some of the utility classes into "GATK-specific" vs generic methods
(eg., GATKVCFUtils vs. VCFUtils)
-Placement of some methods and choice of exception classes to replace the StingExceptions
and UserExceptions may need to be tweaked until everyone is happy, but this can be
done after the move.
-- Just separated infrastructure into core package, away from the walkers themselves.
-- Added na12878kb.jar target that builds a jar that can run a test main function (see testNA12878kbJar.csh)
-Allows packaged resource files to be accessed within tests
-Guards against packaging errors in dist/ jars by testing the
jars that actually get run rather than unpackaged class files.
Previously we were only protected against packaging errors in the
monolithic jars posted to our website, not the dist/ jars used in
everyday runs.
-"ant fasttest" still uses the unpackaged class files for speed
(don't want to have to rebuild the jars in fasttest). Relies on
dubious methods to get at the resource files that would end up
in the jars.
-Eliminated the stupid separate "test" ivy config. Now we only
invoke ivy ONCE during an ant build that includes tests.
-Resources must be in a "resources" or "templates" subdirectory within the Java package hierarchy
-Remove direct inclusion of private resources from the main jar packaging target added in Jacob's
patch: this would break builds where the private directory was absent, and did not respect build
settings (include.private, etc.)
Create MongoDBManager, which keeps track of connections based on Locator class. Locators can be instantiated directly, or read from JSON files (NA12878DBArgumentCollection uses the GSon library)
Packaging from a non-clean working directory can result in an incorrect
jar. Now that we have external collaborators packaging and distributing
the GATK, not enforcing the clean requirement has become far too dangerous.
At the same time, invoking "clean" automatically through a direct
dependency would also be dangerous -- instead, it's better to error out
if a packaging target is invoked from a non-clean working dir.
-- Closes GSA-494 / Add maximum runtime for integration tests, running them in timeout thread
-- Needed to debug locking issues
-- Needed to debug excessively long running integrationtests
-- Added build.xml maximum runtime for all testng tests of 10 hours. We will ultimately fail the build if it goes on for more than 10 hours
Added targets to build.xml to effectively 'mvn install' packaged GATK/Queue from ant.
TODO: Versions during 'mvn install' are hardcoded at 0.0.1 until a better versioning scheme that works with maven dependencies has been identified.
-- Renamed TraversalErrorManager to the more general MultiThreadedErrorTracker
-- ErrorTracker is now used throughout the NanoScheduler. In order to properly handle errors, the work previously done by main thread (submit jobs, block on reduce) is now handled in a separate thread. The main thread simply wakes up peroidically and checks whether the reduce result is available or if an error has occurred, and handles each appropriately.
-- EngineFeaturesIntegrationTest checks that -nt and -nct properly throw errors in Walkers
-- Added NanoSchedulerUnitTest for input errors
-- ThreadEfficiencyMonitoring is now disabled by default, and can be enabled with a GATK command line option. This is because the monitoring doesn't differentiate between threads that are supposed to do work, and those that are supposed to wait, and therefore gives misleading results.
-- Build.xml no longer copies the unittest results verbosely
The previous push fixed the external classpath issue but broke external
builds in a new way by changing the above from paths to properties. This
was a mistake, since external builds require absolute, not relative, paths
Thanks to akiezun for the bug report and patch
Use "path" instead of "pathconvert" to construct the external.gatk.classpath.
This allows the path to evolve as the build progresses, instead of being
fixed early on to a value that (in some cases) could be incorrect.
Cuts major corners for speed. Tests start in SECONDS instead of minutes.
SIGNIFICANT limitations (see below!)
Usage: ant fasttest -Dsingle=TestClass
The idea is that you do a regular "ant test -Dsingle=TestClass" (or "ant committests")
FIRST, then do "ant fasttest -Dsingle=TestClass" for all subsequent runs until
satisfied.
LIMITATIONS:
-REQUIRES that a full test build has already been done (using one of the
test targets like committests, or a manual "ant test.compile").
-Java only
-Single test class only
-No contracts
-Build jars in dist/ not updated, only classes in build/
-Version number output at runtime may be incorrect
-Classpaths to test the release jars were being constructed prematurely,
before all needed properties had been defined
-Added reportng as a TestNG dependency for testing purposes
* Targets to package and release lite/protected versions of the GATK/Queue
* Still TODO: -determine the actual directories where the protected releases should go
-update the Bamboo release plan
-fix a bug in the binary release test targets
-- Fully working version
-- Use -generateShadowBCF to write out foo.bcf as well as foo.vcf anywhere you use -o foo.vcf
-- Moved MedianUnitTest to its proper home in Utils
-- Added reportng to ivy and testng, so build/report/X/html/ is a nicely formatted output for Unit and Integration tests. From this website it's easy to see md5 diffs, etc. This is a vastly better way to manage unit and integration test output
-- Added VCFHeader() constructor that makes an empty header, and updated VariantRecalibrator to use it
-- Update build.xml to build vcf.jar with updated paths and bcf2 support.
* Added support for a protected directory whose contents are only made public in binary form
* Simplified and reorganized build.xml to improve readability and maintainability
* build.xml now autodetects most build properties:
-Includes private/protected if they exist
-No more STING_BUILD_TYPE or specialized targets for public-only, etc.
* Build targets have changed! There are now two main build options:
"ant" build everything (GATK and Queue)
"ant gatk" build just the GATK
It was too hard to build everything before -- now it is the default.
* To run tests with debugging, use -Dtest.debug=true -Dtest.debug.port=XXXX on the command line.
Much better than the old comment/uncomment method!
David Roazen
Chris Hartl
Jacob Silterra
Mauricio Carneiro
Mark DePristo
kshakir