-- Strandless GATK reads are ones where they don't really have a meaningful strand value, such as Reduced Reads or fragment merged reads. Added GATKSAMRecord support for such reads, along with unit tests
-- The merge overlapping fragments code in FragmentUtils now produces strandless merged fragments
-- FisherStrand annotation generalized to treat strandless as providing 1/2 the representative count for both strands. This means that that merged fragments are properly handled from the HC, so we don't hallucinate fake strand-bias just because we managed to merge a lot of reads together.
-- The previous getReducedCount() wouldn't work if a read was made into a reduced read after getReducedCount() had been called. Added new GATKSAMRecord method setReducedCounts() that does the right thing. Updated SlidingWindow and SyntheticRead to explicitly call this function, and so the readTag parameter is now gone.
-- Update MD5s for change to FS calculation. Differences are just minor updates to the FS
GATK-73 updated docs for bqsr args
GATK-9 differentiate CountRODs from CountRODsByRef
GATK-76 generate GATKDoc for CatVariants
GATK-4 made resource arg required
GATK-10 added -o, some docs to CountMales; some docs to CountLoci
GATK-11 fixed by MC's -o change; straightened out the docs.
GATK-77 fixed references to wiki
GATK-76 Added Ami's doc block
GATK-14 Added note that these annotations can only be used with VariantAnnotator
GATK-15 specified required=false for two arguments
GATK-23 Added documentation block
GATK-33 Added documentation
GATK-34 Added documentation
GATK-32 Corrected arg name and docstring in DiffObjects
GATK-32 Added note to DO doc about reference (required but unused)
GATK-29 Added doc block to CountIntervals
GATK-31 Added @Output PrintStream to enable -o
GATK-35 Touched up docs
GATK-36 Touched up docs, specified verbosity is optional
GATK-60 Corrected GContent annot module location in gatkdocs
GATK-68 touched up docs and arg docstrings
GATK-16 Added note of caution about calling RODRequiringAnnotations as a group
GATK-61 Added run requirements (num samples, min genotype quality)
Tweaked template and generic doc block formatting (h2 to h3 titles)
GATK-62 Added a caveat to HR annot
Made experimental annotation hidden
GATK-75 Added setup info regarding BWA
GATK-22 Clarified some argument requirements
GATK-48 Clarified -G doc comments
GATK-67 Added arg requirement
GATK-58 Added annotation and usage docs
GSATDG-96 Corrected doc
Updated MD5 for DiffObjectsIntegrationTests (only change is link in table title)
* Allow RR to write its BAM to stdout by setting required=true for @Output.
* Fixed bug in sliding window where a break in coverage after a long stretch without
a variant region was causing a doubling of all the reads before the break.
* Refactored SlidingWindow.updateHeaderCounts() into 3 separate tested methods.
* Refactored polyploid consensus code out of SlidingWindow.compressVariantRegion().
Ancient DNA sequencing data is in many ways different from modern data, and methods to analyze it need to be adapted accordingly.
Feature 1: Read adaptor trimming. Ancient DNA libraries typically have very short inserts (in the order of 50 bp), so typical Illumina libraries sequenced in, say, 100bp HiSeq will have a large adaptor component being read after the insert.
If this adaptor is not removed, data will not be aligneable. There are third party tools that remove adaptor and potentially merge read pairs, but are cumbersome to use and require precise knowledge of the library construction and adaptor sequence.
-- New walker ReadAdaptorTrimmer walks through paired end data, computes pair overlap and trims auto-detected adaptor sequence.
-- Unit tests added for trimming operation.
-- Utility walker (may be retired later) DetailedReadLengthDistribution computes insert size or read length distribution stratified by read group and mapping status and outputs a GATKReport with data.
-- Renamed MaxReadLengthFilter to ReadLengthFilter and added ability to specify minimum read length as a filter (may be useful if, as a consequence of adaptor trimming, we're left with a lot of very short reads which will map poorly and will just clutter output BAMs).
Feature 2: Unbiased site QUAL estimation: many times ancestral allele status is not known and VCF fields like QUAL, QD, GQ, etc. are affected by the pop. gen. prior at a site. This might introduce subtle biases in studies where a species is aligned against the reference of another species, so an option for UG and HC not to apply such prior is introduced.
-- Added -noPrior argument to StandardCallerArgumentCollection.
-- Added option not to fill priors is such argument is set.
-- Added an integration test.
* ReadTransformers can say they must be first, must be last, or don't care.
* By default, none of the existing ones care about ordering except BQSR (must be first).
* This addresses a bug reported on the forum where BAQ is incorrectly applied before BQSR.
* The engine now orders the read transformers up front before applying iterators.
* The engine checks for enabled RTs that are not compatible (e.g. both must be first) and blows up (gracefully).
* Added unit tests.
-- The new code includes a new mode to write out a BAM containing reads realigned to the called haplotypes from the HC, which can be easily visualized in IGV.
-- Previous functionality maintained, with bug fixes
-- Haplotype BAM writing code now lives in utils
-- Created a base class that includes most of the functionality of writing reads realigned to haplotypes onto haplotypes.
-- Created two subclasses, one that writes all haplotypes (previous functionality) and a CalledHaplotypeBAMWriter that will only write reads aligned to the actually called haplotypes
-- Extended PerReadAlleleLikelihoodMap.getMostLikelyAllele to optionally restrict set of alleles to consider best
-- Massive increase in unit tests in AlignmentUtils, along with several new powerful functions for manipulating cigars
-- Fix bug in SWPairwiseAlignment that produces cigar elements with 0 size, and are now fixed with consolidateCigar in AlignmentUtils
-- HaplotypeCaller now tracks the called haplotypes in the GenotypingEngine, and returns this information to the HC for use in visualization.
-- Added extensive docs to HaplotypeCaller on how to use this capability
-- BUGFIX -- don't modify the read bases in GATKSAMRecord in LikelihoodCalculationEngine in the HC
-- Cleaned up SWPairwiseAlignment. Refactored out the big main and supplementary static methods. Added a unit test with a bug TODO to fix what seems to be an edge case bug in SW
-- Integration test to make sure we can actually write a BAM for each mode. This test only ensures that the code runs and doesn't exception out. It doesn't actually enforce any MD5s
-- HaplotypeBAMWriter also left aligns indels in the reads, as SW can return a random placement of a read against the haplotype. Calls leftAlign to make the alignments more clear, with unit test of real read to cover this case
-- Writes out haplotypes for both all haplotype and called haplotype mode
-- Haplotype writers now get the active region call, regardless of whether an actual call was made. Only emitting called haplotypes is moved down to CalledHaplotypeBAMWriter
* Removed from codebase NestedHashMap since it is unused and untested.
* Integration tests change because the BQSR CSV is now sorted automatically.
* Resolves GSA-732
-was previously set to 30, which seems far too aggressive given that with
ActiveRegionWalkers, as with LocusWalkers, this limits the depth of any
pileup returned by LIBS
-250 is a more conservative default used by the UG
-can adjust down/up later based on further experiments (GSA-699 will
remain open)
-verified with Ryan that all integration test differences are either
innocent or represent an improvement
GSA-699
-- This is done to take advantage of longer reads which can produce less ambiguous haplotypes
-- Integration tests change for HC and BiasedDownsampling
-- Instead of doing a full SW alignment against the reference we read off bubbles from the assembly graph.
-- Smith-Waterman is run only on the base composition of the bubbles which drastically reduces runtime.
-- Refactoring graph functions into a new DeBruijnAssemblyGraph class.
-- Bug fix in path.getBases().
-- Adding validation code to the assembly engine.
-- Renaming SimpleDeBruijnAssembler to match the naming of the new Assembly graph class.
-- Adding bug fixes, docs and unit tests for DeBruijnAssemblyGraph and KBestPaths classes.
-- Added ability to ignore bubbles that are too divergent from the reference
-- Max kmer can't be bigger than the extension size.
-- Reverse the order that we create the assembly graphs so that the bigger kmers are used first.
-- New algorithm for determining unassembled insertions based on the bubble traversal instead of the full SW alignment.
-- Don't need the full read span reference loc for anything any more now that we clip down to the extended loc for both assembly and likelihood evaluation.
-- Updating HaplotypeCaller and BiasedDownsampling integration tests.
-- Rebased everything into one commit as requested by Eric
-- improvements to the bubble traversal are coming as a separate push
These 2 changes improve runtime performance almost as much as Ryan's previous attempt (with ID-based comparisons):
* Don't unnecessarily overload Allele.getBases() in the Haplotype class.
* Haplotype.getBases() was calling clone() on the byte array.
* Added a constructor to Allele (and Haplotype) that takes in an Allele as input.
* It makes a copy of he given allele without having to go through the validation of the bases (since the Allele has already been validated).
* Rev'ed the variant jar accordingly.
For the reviewer: all tests passed before rebasing, so this should be good to go as far as correctness.
-- modified ReadBin GenomeLoc to keep track of softStart() and softEnd() of the reads coming in, to make sure the reference will always be sufficient even if we want to use the soft-clipped bases
-- changed the verification from readLength to aligned bases to allow reads with soft-clipped bases
-- switched TreeSet -> PriorityQueue in the ConstrainedMateFixer as some different reads can be considered equal by picard's SAMRecordCoordinateComparator (the Set was replacing them)
-- pulled out ReadBin class so it can be testable
-- added unit tests for ReadBin with soft-clips
-- added tests for getMismatchCount (AlignmentUtils) to make sure it works with soft-clipped reads
GSA-774 #resolve
-- The UG was using MathUtils binomial probability backward, so that the estimated confidence was always NaN, and was as a side effect other utils converted this to a meaningless 0.0. This is all because there wasn't a unit test.
-- I've fixed the calculation, so it's now log10 based, uses robust MathUtils and QualityUtils functions to compute probabilities, and added a unit test.
-- Fixed a few conversion bugs with edge case quals (ones that were very high)
-- Fixed a critical bug in the conversion of quals that was causing near capped quals to fall below their actual value. Will undoubtedly need to fix md5s
-- More precise prob -> qual calculations for very high confidence events in phredScaleCorrectRate, trueProbToQual, and errorProbToQual. Very likely to improve accuracy of many calculations in the GATK
-- Added errorProbToQual and trueProbToQual calculations that accept an integer cap, and perform the (tricky) conversion from int to byte correctly.
-- Full docs and unit tests for phredScaleCorrectRate and phredScaleErrorRate.
-- Renamed probToQual to trueProbToQual
-- Added goodProbability and log10OneMinusX to MathUtils
-- Went through the GATK and cleaned up many uses of QualityUtils
-- Cleanup constants in QualityUtils
-- Added full docs for all of the constants
-- Rename MAX_QUAL_SCORE to MAX_SAM_QUAL_SCORE for clarity
-- Moved MAX_GATK_USABLE_Q_SCORE to RecalDatum, as it's s BQSR specific feature
-- Convert uses of QualityUtils.errorProbToQual(1-x) to QualityUtils.trueProbToQual(x)
-- Cleanup duplicate quality score routines in MathUtils. Moved and renamed MathUtils.log10ProbabilityToPhredScale => QualityUtils.phredScaleLog10ErrorRate. Removed 3 routines from MathUtils, and remapped their usages into the better routines in QualityUtils
-- Renamed ValidatePileup to CheckPileup since validation is reserved word
-- Renamed AlignmentValidation to CheckAlignment (same as above)
-- Refactored category definitions to use constants defined in HelpConstants
-- Fixed a couple of minor typos and an example error
-- Reorganized the GATKDocs index template to use supercategories
-- Refactored integration tests for renamed walkers (my earlier refactoring had screwed them up or not carried over)
-- HaplotypeCaller and PerReadAlleleLikelihoodMap should use LinkedHashMaps instead of plain HashMaps. That way the ordering when traversing alleles is maintained. If the JVM traverses HashMaps with random ordering, different reads (with same likelihood) may be removed by contamination checker, and different alleles may be picked if they have same likelihoods for all reads.
-- Put in some GATKDocs and contracts in HaplotypeCaller files (far from done, code is a beast)
-- Update md5's due to different order of iteration in LinkedHashMaps instead of HashMaps inside HaplotypeCaller (due to change in PerReadAlleleLikelihoodMap that also slightly modifies reads chosen by per-read downsampling).
-- Reenabled testHaplotypeCallerMultiSampleGGAMultiAllelic test
-- Added some defensive argument checks into HaplotypeCaller public functions (not intended to be done yet).
-- Sorted out contents of BAM Processing vs. Diagnostics & QC Tools
-- Moved two validation-related walkers from Diagnostics & QC to Validation Utilities
-- Reworded some category names and descriptions to be more explicit and user-friendly
-- The new HMM new edge conditions the likelihoods are offset by log10(n possible starts) so the results don't really mean "fits the haplotype well" any longer. This results in grossly inflated HaplotypeScores for indels and with the HaplotypeCaller. So I'm simply not going to emit this annotation value any longer for indels and for the HC
-- Uses 1/N for N potential start sites as the probability of starting at any one of the potential start sites
-- Add flag that says to use the original edge condition, respected by all subclasses. This brings the new code back to the original state, but with all of the cleanup I've done
-- Only test configurations where the read length <= haplotype length. I think this is actually the contract, but we'll talk about this tomorrow
-- Fix egregious bug with the myLog10SumLog10 function doing the exact opposite of the requested arguments, so that doExact really meant don't do exact
-- PairHMM now exposes computeReadLikelihoodGivenHaplotypeLog10 but subclasses must overload subComputeReadLikelihoodGivenHaplotypeLog10. This protected function does the work, and the public function will do argument and result QC
-- Have to be more tolerant of reference (approximate) HMM. All unit tests from the original HMM implementations pass now
-- Added locs of docs
-- Generalize unit tests with multiple equivalent matches of read to haplotype
-- Added runtime argument checking for initial and computeReadLikelihoodGivenHaplotypeLog10
-- Functions to dumpMatrices for debugging
-- Fix nasty bug (without original unit tests) in LoglessPairHMM
-- Max read and haplotype lengths only worked in previous code if they were exactly equal to the provided read and haplotype sizes. Fixed bug. Added unit test to ensure this doesn't break again.
-- Added dupString(string, n) method to Utils
-- Added TODOs for next commit. Need to compute number of potential start sites not in initialize but in the calc routine since this number depends not on the max sizes but the actual read sizes
-- Unit tests for the hapStartIndex functionality of PairHMM
-- Moved computeFirstDifferingPosition to PairHMM, and added unit tests
-- Added extensive unit tests for the hapStartIndex functionality of computeReadLikelihoodGivenHaplotypeLog10
-- Still TODOs left in the code that I'll fix up
-- Logless now compute constants, if they haven't been yet initialized, even if you forgot to say so
-- General: the likelihood penalty for potential start sites is now properly computed against the actual read and reference bases, not the maximum. This involved moving some initialize() code into the computeLikelihoods function. That's ok because all of the potential log10 functions are actually going to cached versions, so the slowdown is minimal
-- Added some unit tests to ensure that common errors (providing haplotypes too long, reads too long, not initializing the HMM) are captured as errors
Mark DePristo
MauricioCarneiro
Geraldine Van der Auwera
Eric Banks
Ryan Poplin
Guillermo del Angel
Alec Wysoker
David Roazen