-- In the case where there's some variation to assembly and evaluate but the resulting haplotypes don't result in any called variants, the reference model would exception out with "java.lang.IllegalArgumentException: calledHaplotypes must contain the refHaplotype". Now we detect this case and emit the standard no variation output.
-- [delivers #54625060]
Problem
-------
Caching strategy is incompatible with the current sorting of the haplotypes, and is rendering the cache nearly useless.
Before the PairHMM updates, we realized that a lexicographically sorted list of haplotypes would optimize the use of the cache. This was only true until we've added the initial condition to the first row of the deletion matrix, which depends on the length of the haplotype. Because of that, every time the haplotypes differ in length, the cache has to be wiped. A lexicographic sorting of the haplotypes will put different lengths haplotypes clustered together therefore wasting *tons* of re-compute.
Solution
-------
Very simple. Sort the haplotypes by LENGTH and then in lexicographic order.
1. Removing old legacy code that was capping the positional depth for reduced reads to 127.
Unfortunately this cap affectively performs biased down-sampling and throws off e.g. FS numbers.
Added end to end unit test that depth counts in RR can be higher than max byte.
Some md5s change in the RR tests because depths are now (correctly) no longer capped at 127.
2. Down-sampling in ReduceReads was not safe as it could remove het compressed consensus reads.
Refactored it so that it can only remove non-consensus reads.
Now only filtered reads are unstranded. All consensus reads have strand, so that we
emit 2 consensus reads in general now: one for each strand.
This involved some refactoring of the sliding window which cleaned it up a lot.
Also included is a bug fix:
insertions downstream of a variant region weren't triggering a stop to the compression.
So, compromise solution is to go back to having biallelic PLs but emit a new FORMAT field, called APL, which has the 10 values, but all other statistics and regular PLs are computed as before.
Note that integration test had to be disabled, as the BCF2 codec apparently doesn't support writing into genotype fields other than PL,DP,AD,GQ,FT and GT.
Problem
-------
Qualify Missing Intervals only accepted GATK formatted interval files for it's coding sequence and bait parameters.
Solution
-------
There is no reason for such limitation, I erased all the code that did the parsing and used IntervalUtils to parse it (therefore, now it handles any type of interval file that the GATK can handle).
ps: Also added an average depth column to the output
- Added integration test to show that providing a contamination value and providing same value via a file results in the same VCF
- overrode default contamination value in test
1. Some minor refactorings and claenup (e.g. removing unused imports) throughout.
2. Updates to the KB assessment functionality:
a. Exclude duplicate reads when checking to see whether there's enough coverage to make a call.
b. Lower the threshold on FS for FPs that would easily be filtered since it's only single sample calling.
3. Make the HC consistent in how it treats the pruning factor. As part of this I removed and archived
the DeBruijn assembler.
4. Improvements to the likelihoods for the HC
a. We now include a "tristate" correction in the PairHMM (just like we do with UG). Basically, we need
to divide e by 3 because the observed base could have come from any of the non-observed alleles.
b. We now correct overlapping read pairs. Note that the fragments are not merged (which we know is
dangerous). Rather, the overlapping bases are just down-weighted so that their quals are not more
than Q20 (or more specifically, half of the phred-scaled PCR error rate); mismatching bases are
turned into Q0s for now.
c. We no longer run contamination removal by default in the UG or HC. The exome tends to have real
sites with off kilter allele balances and we occasionally lose them to contamination removal.
5. Improved the dangling tail merging implementation.
-- Assembly graph building now returns an object that describes whether the graph was successfully built and has variation, was succesfully built but didn't have variation, or truly failed in construction. Fixing an annoying bug where you'd prefectly assembly the sequence into the reference graph, but then return a null graph because of this, and you'd increase your kmer because it null was also used to indicate assembly failure
--
-- Output format looks like:
20 10026072 . T <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:3,0:3:9:0,9,120
20 10026073 . A <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:3,0:3:9:0,9,119
20 10026074 . T <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:3,0:3:9:0,9,121
20 10026075 . T <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:3,0:3:9:0,9,119
20 10026076 . T <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:3,0:3:9:0,9,120
20 10026077 . T <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:3,0:3:9:0,9,120
20 10026078 . C <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:5,0:5:15:0,15,217
20 10026079 . A <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:6,0:6:18:0,18,240
20 10026080 . G <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:6,0:6:18:0,18,268
20 10026081 . T <NON_REF> . . . GT:AD:DP:GQ:PL 0/0:7,0:7:21:0,21,267
We use a symbolic allele to indicate that the site is hom-ref, and because we have an ALT allele we can provide AD and PL field values. Currently these are calculated as ref vs. any non-ref value (mismatch or insertion) but doesn't yet account properly for alignment uncertainty.
-- Can we enabled for single samples with --emitRefConfidence (-ERC).
-- This is accomplished by realigning the each read to its most likley haplotype, and then evaluting the resulting pileups over the active region interval. The realignment is done by the HaplotypeBAMWriter, which now has a generalized interface that lets us provide a ReadDestination object so we can capture the realigned reads
-- Provide access to the more raw LocusIteratorByState constructor so we can more easily make them programmatically without constructing lots of misc. GATK data structures. Moved the NO_DOWNSAMPLING constant from LIBSDownsamplingInfo to LocusIteratorByState so clients can use it without making LIBSDownsamplingInfo a public class.
-- Includes GVCF writer
-- Add 1 mb of WEx data to private/testdata
-- Integration tests for reference model output for WGS and WEx data
-- Emit GQ block information into VCF header for GVCF mode
-- OutputMode from StandardCallerArgumentCollection moved to UnifiedArgumentCollection as its no longer relevant for HC
-- Control max indel size for the reference confidence model from the command line. Increase default to 10
-- Don't use out_mode in HaplotypeCallerComplexAndSymbolicVariantsIntegrationTest
-- Unittests for ReferenceConfidenceModel
-- Unittests for new MathUtils functions
-- The previous code would adapter clip before reverting soft clips, so because we only clip the adapter when it's actually aligned (i.e., not in the soft clips) we were actually not removing bases in the adapter unless at least 1 bp of the adapter was aligned to the reference. Terrible.
-- Removed the broken logic of determining whether a read adaptor is too long.
-- Doesn't require isProperPairFlag to be set for a read to be adapter clipped
-- Update integration tests for new adapter clipping code
I "fixed" this once before but instead of testing with unit tests I used integration tests.
Bad decision.
The proper fix is in now, with a bonafide unit test included.
Previous fixes and tests only covered trailing soft-clips. Now that up front
hard-clipping is working properly though, we were failing on those in the tool.
Added a patch for this as well as a separate test independent of the soft-clips
to make sure that it's working properly.
This time we don't accidentally drop reads (phew), but this bug does cause us not to
update the alignment start of the mate. Fixed and added unit test to cover it.
-- Added experimental LikelihoodRankSum, which required slightly more detailed access to the information managed by the base class, so added an overloaded getElementForRead also provides access to the MostLikelyAllele class
-- Added base class default implementation of getElementForPileupElement() which returns null, indicating that the pileup version isn't supported.
-- Added @Override to many of the RankSum classes for safety's sake
-- Updates to GeneralCallingPipeline: annotate sites with dbSNP IDs,
-- R script to assess the value of annotations for VQSR
-- The VR, when the model is bad, may evaluate log10sumlog10 where some of the values in the vector are NaN. This case is now trapped in VR and handled as previously -- indicating that the model has failed and evaluation continues.
-- Currently we don't support writing a BAM file from the haplotype caller when nct is enabled. Check in initialize if this is the case, and throw a UserException
-- Previous version emitted command lines that look like:
##HaplotypeCaller="analysis_type=HaplotypeCaller input_file=[private/testdata/reduced.readNotFullySpanningDeletion.bam] ..."
the new version provides additional information on when the GATK was run and the GATK version in a nicer format:
##GATKCommandLine=<ID=HaplotypeCaller,Version=2.5-206-gbc7be2b,Date="Thu Jun 20 11:09:01 EDT 2013",Epoch=1371740941197,CommandLineOptions="analysis_type=HaplotypeCaller input_file=[private/testdata/reduced.readNotFullySpanningDeletion.bam] read_buffer_size=null phone_home=AWS ...">
-- Additionally, the command line options are emitted sequentially in the file, so you can see a running record of how a VCF was produced, such as this example from the integration test:
##GATKCommandLine=<ID=HaplotypeCaller,Version=2.5-206-gbc7be2b,Date="Thu Jun 20 11:09:01 EDT 2013",Epoch=1371740941197,CommandLineOptions="lots of stuff">
##GATKCommandLine=<ID=SelectVariants,Version=2.5-206-gbc7be2b,Date="Thu Jun 20 11:16:23 EDT 2013",Epoch=1371741383277,CommandLineOptions="lots of stuff">
-- Removed the ProtectedEngineFeaturesIntegrationTest
-- Actual unit tests for these features!