c44f63c846
Fixing the performance tests: we need to catch the RuntimeException (not samtools' RuntimeIOExcpetion). Also, CountCovariates doesn't need the catch.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@3196 348d0f76-0448-11de-a6fe-93d51630548a
2010-04-19 14:28:12 +00:00
be7cbf948b
adding a catch for the exception thrown by samtools when it attempts to close /dev/null in the performance tests.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@3186 348d0f76-0448-11de-a6fe-93d51630548a
2010-04-16 17:41:48 +00:00
d06c7835d8
Adding performance tests for the indel realigner; should take ~3 hours.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@3151 348d0f76-0448-11de-a6fe-93d51630548a
2010-04-11 04:45:22 +00:00
71f38a9199
Adding performance tests for the recalibrator (Whole Genome and Whole Exome tests).
...
Should take ~3 hours to run.
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@3145 348d0f76-0448-11de-a6fe-93d51630548a
2010-04-09 18:30:59 +00:00
2525ecaa43
Oops. Commented out some tests to improve performance and then checked in the commented out tests. Reverted.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@3012 348d0f76-0448-11de-a6fe-93d51630548a
2010-03-16 16:34:50 +00:00
6dd5f192e7
Performance improvements for RODs in conjunction with new sharding system.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@3010 348d0f76-0448-11de-a6fe-93d51630548a
2010-03-16 14:54:12 +00:00
411d25c8d1
-Integration tests for walkers that use original quals.
...
-framework for pushing -OQ into GATK (not done)
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@3004 348d0f76-0448-11de-a6fe-93d51630548a
2010-03-15 18:46:31 +00:00
dd6122f682
Fixed another bug in the original sharding system. Updated integration tests
...
as appropriate.
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2947 348d0f76-0448-11de-a6fe-93d51630548a
2010-03-07 15:32:18 +00:00
3e0e7aad2d
Removing debug statement. oops.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2858 348d0f76-0448-11de-a6fe-93d51630548a
2010-02-19 15:26:22 +00:00
7f19ff1fa1
Added a new option in the recalibrator to be used by people who have SOLiD data in which only a few of the reads have no-calls in the color space. These reads will be skipped over and left in the bam file untouched.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2857 348d0f76-0448-11de-a6fe-93d51630548a
2010-02-19 15:25:23 +00:00
0b1e243a7b
CountCovariates now sorts the list of standard covariate classes coming from PackageUtils.getClassesImplementingInterface(). As a result some of the integration tests now make use of -standard
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2817 348d0f76-0448-11de-a6fe-93d51630548a
2010-02-10 15:52:20 +00:00
a1054efe8a
Default platform and default read group are no longer set to values by default. The recalibrator throws an exception if needed values are empty in the bam file and the args weren't set by the user. This is done to make it more obvious to the user when the bam file is malformed. Similarly, the recalibrator now refuses to recalibrate any solid reads in which it can't find the color space information with an exception message explaining this. The recalibrator no longer maintains its own version number and instead uses the new global GATK version number.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2690 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-26 18:47:40 +00:00
c98df0a862
Updated solid_recal_modes to work with bfast aligned data. Added an integration test that uses the BFAST file provided by TGen.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2630 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-19 21:18:02 +00:00
f2e539c52f
As per discussions with Tim we are reverting the previous change regarding PairedReadOrderCovariate. The CycleCovariate now differentiates between first and second of pair by multiplying the cycle by -1. PairedReadOrderCovariate has been removed completely.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2592 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-15 18:18:59 +00:00
df998041a8
Minor change to solid warning message. Added note for a future solid recalibration integration test when we get the required data file.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2590 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-15 16:31:25 +00:00
49c44e7b36
PairedReadOrderCovariate is now a standard covariate and because of this CycleCovariate no longer multiplies by negative one for second of pair reads. Added PairedReadOrderCovariate to some of the integration tests.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2574 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-13 20:09:10 +00:00
189829841b
The recalibrator now uses all input RODs when looking for known polymorphic sites not just the one named dbsnp. Added an integration test which uses both dbsnp and an input vcf file and skips over the union of the two.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2564 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-12 18:50:39 +00:00
62dd2fa5be
Fixing another bug in solid recal regarding negative strand reads. The isInconsistentColorSpace method incorrectly used the inconsistent tag added by parseColorSpace, the inconsistent tag is in the direction of the read like the color space tag, and not in the direction of the reference like everything else. This affects the recalibrated quality scores but the improvment in SNP calling performance is minor when using the default UG settings (min base quality 10).
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2553 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-11 14:28:52 +00:00
9cbae53ee1
Bug fixes for both SET_Q_ZERO and REMOVE_REF_BIAS solid recal modes regarding proper handling of negative strand reads. These changes yield a minor improvment in HapMap sensitivity.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2548 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-08 15:19:22 +00:00
f587ff46af
Tile is now a standard covariate. By default the TileCovariate returns -1 if tile can't be derived from the read's name. Added a new command line option -throwTileException which will force TileCovariate to throw an exception if tile can't be derived for a read. Singleton covariates, such as any read group without tile info, must be skipped over in TableRecalibration so that the sequential formulation doesn't apply the same correction more than once. TileCovariate class has been added to the Early Access package.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2544 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-07 22:51:41 +00:00
5f58492401
A rogue QualityUtils.MAX_REASONABLE_Q_SCORE managed to get through my previous bug fix. It should instead check the command line -maxQ argument.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2540 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-07 21:17:39 +00:00
cea544871d
Fixed an issue with recalibrating original quality scores above Q40. There is a new option -maxQ which sets the maximum quality score possible for when a RecalDatum tries to compute its quality score from the mismatch rate. The same option was added to AnalyzeCovariates to help with plotting q scores above Q40. Added an integration test which makes use of this new -maxQ option.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2534 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-07 13:50:30 +00:00
0a6bd5a270
CycleCovariate is now one-based so that 0 and -0 don't collide with each other. Solid recal modes now only change the inconsistent base and the previous base (along the direction of the read) instead of both the bases before and after. Removed estimatedNumberOfBins from the Covariate interface because it wasn't being used.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2498 348d0f76-0448-11de-a6fe-93d51630548a
2010-01-04 20:52:15 +00:00
96c4929b3c
Recalibrator now uses NestedHashMap instead of NHashMap. The keys are now nested hash maps instead of Lists of Comparables. These results in a big speed up (thanks Tim!). There is still a little bit of clean up to do, but everything works now.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2474 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-29 21:01:32 +00:00
a34c2442c0
moved hard-coded file paths to the oneKGLocation, validationDataLocation, and seqLocation variables setup in the BaseTest.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2460 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-29 07:40:48 +00:00
562db45fa5
Sites that were marked NO_DINUC no longer get dinuc-corrected but are still recalibrated using the other available covariates. Solid cycle is now the same as Illumina cycle pending an analysis that looks at the effect of PrimerRoundCovariate. Solid color space methods cleaned up to reduce number of calls to read.getAttribute(). Polished NHashMap sort method in preparation for move to core/utils. Added additional plots in AnalyzeCovariates to look at reported quality as a function of the covariate.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2451 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-28 20:19:37 +00:00
438d21842a
The new recalibrator had been mimicking the behavior of the old one in that if there was no dinuc available (following a no-call base or at either end of a read), it didn't try to recalibrate. Now that Ryan has modularized the system, we no longer need to skip the base completely (we just need to skip the dinuc value)... which is good because the Picard people complained after realizing that cycle #1 never got recalibrated.
...
The major effects of this commit are as follows:
1. We no longer skip any good bases (of course, this change alone breaks every single integration test).
2. The dinuc covariate returns a "no dinuc" value for the first base of a read (but not for the last base anymore, since there is a valid dinuc) or if the previous base is a bad base (e.g. 'N').
I've done a bunch of testing on real data and everything looks right; however, let's wait until the recalibrator guru gets back from vacation next week and can double-check everything before shipping this out in another early access release.
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2443 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-24 20:41:29 +00:00
6df40876a3
Un-reverted Matt's previous changes and fixed integration tests.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2441 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-24 02:47:00 +00:00
872a9d1c7b
I'm making this change now (as opposed to waiting until Monday) to honor Tim's request.
...
The cycle covariate is now first/second of pair aware. I'm taking it on faith from both Chris Hartl (waiting on slides from him) and Tim that this is the right thing to do. We'll have Ryan confirm it all next week.
The only change is that if a read is the second of a pair, we multiple the cycle by -1 (a simple way of separating its index from that of its mate).
Of course, this broke all integration tests.
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2431 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-23 16:26:43 +00:00
fdf542c214
The CycleCovariate for 454 data is now the TACG flow cycle. That is, each flow grabs all the T's, A's, C's, and G's in order in a single cycle. This is changed from incrementing the cycle whenever there is a discontinuous nucleotide along the direction of the read.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2408 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-18 22:39:51 +00:00
6fbf77be95
Updating the two solid_recal_mode options to also change the previous base since solid aligner prefers single color mismatch alignments over true SNP alignments. COUNT_AS_MISMATCH mode has been removed completely. The default mode is now SET_Q_ZERO.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2394 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-17 20:07:26 +00:00
07f1859290
Added integration test for running the recalibrator with no index.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2393 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-17 19:10:53 +00:00
8e44bfd2ef
CycleCovariate and PrimerRoundCovariate now correctly handle negative strand 454 and SOLID reads.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2349 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-14 21:52:30 +00:00
1d5b9883db
Added --solid_recal_mode argument to experiment with different ways of dealing with solid reference bias. Currently the default option is DO_NOTHING which means use the same behavior as the old recalibrator. Eventually the new methods in RecalDataManager will be moved over to a SolidUtils class. Added transition and transversion methods to BaseUtils that work like simpleComplement, used with the color space in my solid methods. Also, initial check-in of HomopolymerCovariate.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2276 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-07 14:26:27 +00:00
3180fffd43
Eliminated unnecessary boxing of longs in RecalDatum. Changes to RecalDatum in preparation for new AnalyzeCovariates script. Updated TableRecalibrationWalker to make use of these changes.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2199 348d0f76-0448-11de-a6fe-93d51630548a
2009-12-01 16:49:05 +00:00
d8146ab23d
Changed the format of the recalibration csv file slightly so that it is easier to load the file into something like R and look at the values of the covariates.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2183 348d0f76-0448-11de-a6fe-93d51630548a
2009-11-30 17:55:23 +00:00
6ff8526592
Added arguments to the recalibration walkers so the user can specify the default read group id and platform to use when a read has no read group. There are also options to force every read group and every platform to be the specified values. Added integration tests that use a bam file with no read groups. Added comments to all the covariates to explain what each of the methods in the Covariate interface are used for.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2157 348d0f76-0448-11de-a6fe-93d51630548a
2009-11-25 15:41:12 +00:00
c9ff5f209c
Added a CountCovariates integration test that uses a vcf file as the list of variant sites to skip over instead of the usual dbSNP rod.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2152 348d0f76-0448-11de-a6fe-93d51630548a
2009-11-24 21:51:38 +00:00
dffa46b380
BAM files created by TableRecalibration now have the version number and list of covariates used appended to their header with a new 'PG' tag. Eventually the entire list of command line args will be put in there as well. Big thanks to Matt and Aaron. The integration test uses the --no_pg_tag so that the md5 doesn't change every time the version number changes.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2148 348d0f76-0448-11de-a6fe-93d51630548a
2009-11-24 20:53:57 +00:00
7f947f6b60
Updated recalibrator integration tests to use all three platforms as well as a bam with multi-platform reads intermingled. CountCovariates v2.0.1: Once again uses a read filter to filter out zero mapping quality reads. Added --sorted_output option to output the table recalibration file in sorted order
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2122 348d0f76-0448-11de-a6fe-93d51630548a
2009-11-23 19:51:36 +00:00
1d46de6d34
The old recalibrator is replaced with the refactored recalibrator. Added a version message to the logger output. These walkers start at version 2.0.0
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2117 348d0f76-0448-11de-a6fe-93d51630548a
2009-11-23 14:58:33 +00:00
22aaf8c5e0
Added the old recalibrator integration tests to the refactored recalibrator sitting in playground.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@2096 348d0f76-0448-11de-a6fe-93d51630548a
2009-11-19 22:43:28 +00:00
2e4949c4d6
Rev'ing Picard, which includes the update to get all the reads in the query region (GSA-173). With it come a bunch of fixes, including retiring the FourBaseRecaller code, and updated md5 for some walker tests.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1751 348d0f76-0448-11de-a6fe-93d51630548a
2009-09-30 20:37:59 +00:00
b0fa19a0b2
Fixed recal integration test
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1689 348d0f76-0448-11de-a6fe-93d51630548a
2009-09-22 20:22:32 +00:00
d9588e6083
bug fixes to LIBS and LIBH following ultra-aggressive regression testing across 454, solid, and solexa
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1558 348d0f76-0448-11de-a6fe-93d51630548a
2009-09-09 15:36:12 +00:00
0df6a9da5c
-Seperating out normal (unit) tests and integration tests. From now on if your test are more of an integration test (i.e. you're testing a walker and all the subunits it relies on) please name the test "______IntegrationTest.java" instead of "______Test.java".
...
-Bamboo will now run the integration tests once a day, and the normal units tests on each check-in.
-Also added a bunch of unit tests for VariantEval walker
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1555 348d0f76-0448-11de-a6fe-93d51630548a
2009-09-09 15:01:40 +00:00
1c3d67f0f3
Improvements to the CountCovariates and TableRecablirator, as well as regression tests for SLX and 454 data
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1539 348d0f76-0448-11de-a6fe-93d51630548a
2009-09-04 22:26:57 +00:00
8e129d76fd
Support for original quality scores OQ flag. pQ flag in TableRecalibation to preserve quality scores below a threshold (defaulting to 5)
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1474 348d0f76-0448-11de-a6fe-93d51630548a
2009-08-28 14:14:21 +00:00
2db86b7829
Move the cleaned read injector test from playground to core. Remove CovariateCounterTest's dependency on the CleanedReadInjector. Start doing a bit of cleanup on the CLP's FieldParsers.
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1312 348d0f76-0448-11de-a6fe-93d51630548a
2009-07-24 19:44:04 +00:00
b9d533042e
Two-tailed HardyWeinberg test implemented. VariantEval now separate violations from summary outputs for clarity; Fixing problems with CovariateCounterTest and TabularRodTest
...
git-svn-id: file:///humgen/gsa-scr1/gsa-engineering/svn_contents/trunk@1177 348d0f76-0448-11de-a6fe-93d51630548a
2009-07-06 22:02:04 +00:00
ebanks
aaron
hanna
rpoplin
depristo